Splicer w/top metal cover, heat oven, and spare pair of electrodes. Some are set up for large fiber holders, 250um(right side) and 400um(left side) v-grooves(1.25" by 2.75",) and others are set up for the standard smaller fiber holders. We have several units without the hard metal top. Contact us for discounts on these units.

The S182A is similar in function to Fitel's S175 but with the added feature of splicing high strength fiber. Contact us for purchasing multiple units.

This is a USA Model.

It is not necessary to use the fiber holders with this model. The fiber can be loaded individually by sight as easily as with any other splicer, if so desired.

The S182A is specifically designed for splicing fiber of the same mode field diameter. The attenuation function of the S182A can also be automated with optional PC Remote control software. The unit's optimized design - with function keys and LCD monitor located behind the splicing area - provides you with uncluttered, efficient access to the splicing area for maximum productivity. The S182A does not touch the bare portion of the fiber, can accommodate 3 to 5 mm cleave lengths and when used with Fitel's High Strength Splicing Kits provides a high strength splice with an average tensile strength of 20N. The S182A can also be used for non-high strength applications.