Do you have any questions that I can help you with?
|
Physical Condition:
Very Good
Working Condition:
Fully Functional
|
Terms of sales:
90-Day Warranty
|
Sumitomo Type-45s Fusion Splicer Kit
Manufacturer DescriptionThe Type 45S Micro-Single is an economical means for creating automatic, low-loss optical fiber fusion splices offering superb splicing portability. The front-to-back workflow is ideal for splicing in confined areas such as aerial or taut-sheath applications.
The Type-45S typically requires less than 20 seconds to make an automatic fusion splice, and the average splice loss for identical single mode fibers is 0.05 decibels (dB). The Type-45S is equipped with an on-board splice protection heater that is used to heat shrink a fiber protection sleeve over a completed splice. A 60mm fiber protection sleeve can be fully shrunk in less than 75 seconds.
| Alignment Method | Fixed V-Groove |
| Fiber Requirement | Silica Glass |
| Profile Type | SMF, MMF and NZ-DSF |
| Cladding Diameter | 125µm |
| Coating Diameter | 250 to 900µm |
| Typical Splice Loss, Identical Fibers |
SMF: 0.05dB MMF: 0.03dB NZ-DSF: 0.07dB |
| Number of Fusion Condition Settings | 48 Programs |
| Splice Parameters | 7 Adjustable Parameters |
| Arc Test Compensation | Automatic |
| Number of Heater Condition Settings | 10 |
| Typical Splice Cycle Time | 20 Seconds (Set to Loss Estimation) |
| Proof Test | Standard, 200 Grams (0.44 lb) |
| Splice Data Storage | 500 Splices |
On-board Splice Protection Heater
5.6" Color LCD Monitor
Operation by AC Power or 12V Li-ion Battery
Tool-free Maintenance for Changing Electrodes
See Larger Image
