Authorized INNO Sales & ServiceAuthorized Sales & Service Center

The new V20 Fiber Microscope by INNO Instrument can keep fiber testing simple and quick. It provides accurate test results with your choice of either 200x or 360x magnification. It uses a convenient rotary knob on the microscope to adjust the focus, and you will be able to visually analyze the fiber endface when connected with the usb port. 

• Detecting fiber connection
• Centering the image
• Image magnification
• Adjust the focus
• Analyze data to judge whether passed of failed
• Testing report

Manufacturer Description:

Importance of a clean connector end interface

It is essential to utilize auto-analysis software to test the connector and assess its quality during the commissioning and installation of the fiber. It is important to save the verification records of the connector for future reference. The end-to-end verification can be achieved by combining the connector test with the fiber verification. The following are the displayed test images.


V20 is equipped with PC testing software

Such software is installed on a PC, connected easily by a USB 2.0 interface. This makes the operation convenient. The results can be analyzed through the following procedure: connecting the optical fiber to the device, adjusting the sharpness and then tapping “screenshot”.


INNO Fiber Microscope
Size 150 x 35 x 34mm
Weight 168g
Resolution 3.2μm
Visual test < 5μm
View angle 200μm*200μm of high magnification 360μm*360μm of low magnification
Light source Blue LED
Digital zoom 3 grades
Connector USB 2.0
Operating temperature -10°C to 50°C
Storage temperature -40°C to 70°C
Image sensor 640 x 480 (VGA)

Write a review

Note: HTML is not translated!
    Bad           Good

INNO V20 Fiber Microscope, 200x/360x

  • Item ID: 254535
  • INNO Instrument
  • Brand: INNO Instrument
  • Model: V20
  • Availability: Contact for Availability
  • Condition: New
  • $812.00

Related Products

Tags: New